Filter
Top Products
L
R
Audio Cable
If the external analog component
has only one Audio Out, connect
either left or right.
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
1
Example: Analog signal components such as a VCR, Camcorder, and TV.
Connecting to an External Analog Component
Connecting to External
Components
Press AUX to select AUX.
•
‘
AUX’ appears in the display.
2
Connecting the FM and
AM(MW) Antennas
FM antenna connection AM(MW) antenna connection
1. Connect the FM antenna supplied to the FM 75Ω
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
•
If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard
type connector), disconnect the supplied FM antenna.
1. Connect the AM loop antenna supplied
to the AM and terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
If FM reception is poor,
connect an outdoor FM
antenna (not supplied).
FM
Antenna
(supplied)
AM Loop Antenna
(supplied)
1211
MM-DX7(1p~30p)-NO-6 4/13/07 14:53 Page 14