Filter
Top Products
39 40
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
1
2
Press MENU button in the
stop mode.
Press Cursor button to
move to ‘Audio’ and then
press ENTER button.
•
The Cursor button is pressed, the greater
the effect, and the Cursor button is
pressed, the smaller the effect.
3
4
If “DRC” is selected,
press ENTER.
Press Cursor , to
adjust the ‘DRC’.
Press RETURN button to return to the previous level.
Press MENU or EXIT button to exit the setup screen.
SETUP
AV SYNC Setup
Press RETURN button to return to the previous level.
Press MENU or EXIT button to exit the setup screen.
•
'Audio' menu appears.
21
•
Setup menu appears.
•
AV-SYNC screen appears.
3
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
Press Cursor , buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
Press the MENU button in
the stop mode.
4
•
You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press Cursor , buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
MM-DX7(31p~64p)-GB-NO-4 4/12/07 9:42 Page 38