Filter
Top Products
18
functions
You may be required to enter a PIN code (password) when connecting the Bluetooth device to
the Air Track. If the PIN code input window appears, enter <0000>.
The Airtrack only supports Middle Quality SBC data (up to 237kpps@48kHz). It does not
support High Quality SBC data (328kbps@44.1kHz).
The AVRCP feature is not supported.
Connect only to a Bluetooth device that supports the A2DP (AV) function.
You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function.
Only one Bluetooth device can be paired at a time.
Once you have turned off Air Track and the pairing is disconnected, the pairing will not be
restored automatically. To reconnect, you must pair the device again.
Search or connection may not be performed properly by Air Track in the following cases:
- If there is a strong electrical field around the Air Track.
- If several Bluetooth devices are simultaneously paired with AirTrack.
- If the Bluetooth device is turned off, not in place, or malfunctions.
- Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and
gas stoves use the same frequency range as the Bluetooth device, which can cause electric
interference.
To disconnect the Bluetooth device from the Air Track
You can disconnect the Bluetooth device from the Air Track. For instructions, see the Bluetooth
device's user manual.
• The Air Track will be disconnected.
• When the Air Track is disconnected from the Bluetooth device the Air Track will display BT
DISCONNECTED on the front display.
To disconnect the Air Track from the Bluetooth device
Press the ( ) button on the front panel of the Air Track to switch from BT to another mode or turn
off the Air Track.
• The connected Bluetooth device will wait a certain amount of time for a response from the Air
Track before terminating the connection. (Disconnection time may differ, depending on the
Bluetooth device)
• The currently connected device will be disconnected.
In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Air Track and the Bluetooth device exceeds 16.25 ft. (5m).
If the Bluetooth device comes back into the effective range after disconnecting, you can restart
the Air Track to restore the pairing with the Bluetooth device.
The Air Track automatically turns off after 20 minutes in the Ready state.