Filter
Top Products
10
connections
INSTALLING THE WALL MOUNT
You can use the wall mount bracket to mount this unit on a wall.
Installation Precautions
• Install on a vertical wall only.
• For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight of
the set.
• Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install the
unit on a different wall that can support the unit's weight.
• Purchase and use the fixing screws or anchor appropriate for the kind of wall you have (plaster board, iron board,
wood, etc.). If possible, fix the support screws into wall studs.
• Connect cables from the unit to external devices before you install it on the wall.
• Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
1. Place the wall mount bracket on a wall surface and then
secure it with two screws. If you are hanging the unit below a
TV, be sure to install the wall mount bracket so that the arrow
(
) is placed in the center of the TV. Also make sure the unit
is at least two inches (5 cm) below the TV.
2. Align the two HOLDER-SCREWs (screw holders) with the
screw holes on the left and right sides of the MAIN UNIT, and
then fix them to the main unit with the supplied screws.
3. Fit the unit into the corresponding slots of the wall mount
bracket. For secure installation, make sure the mounting
studs slide firmly down into the bottom of the slots.
4. The installation is complete.
Do not hang onto the installed unit and avoid striking or dropping the unit.
Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an injury or
damage the product.
When the unit is installed on a wall, please make sure that children do not pull any of the connecting
cables, as it may cause it to fall.
For the optimal performance of a wall mount installation, install the speaker system at least 2 inches (5 cm)
below the TV.
For your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it is
unlikely to fall.
5
V
0
.5A
2 inches (5 cm) or more