Filter
Top Products
40
Setup
SETTING NEO:6 MODE
You can play back 2 channel sound over 6.1 channels when enjoying music or a movie.
Press the SETUP/MENU button.
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
Press the ENTER button to select SETUP ENTER.
Press the
▲▼
buttons to select NEO:6 SETUP, and then press the
ENTER or
►
button.
Press the
▲▼
buttons to set the C-IMAGE mode you want.
You can set C-IMAGE from 0 to 5
This parameter adjusts the height of the center image through the front
and center speakers.
“0” is the lowest while “5” is the highest.
- To exit setup mode-
Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.
NEO:6 mode cannot be used with Dolby Digital, Dolly Digital +, Dolby true HD, DTS, DTS-HD Master Audio.
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
1.
•
2.
3.
4.
•
M
Æ
Æ
HW-C700-C770S-C770BS-XAC_0616.in40 40HW-C700-C770S-C770BS-XAC_0616.in40 40 2010-06-17 10:08:022010-06-17 10:08:02