Filter
Top Products
36
Setup
SETTING THE SPEAKER LEVEL
You can set the balance and level of speakers.
Press the SETUP/MENU button.
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
Press the ENTER button to select SETUP ENTER.
Press the
▲▼
buttons to select SPK LEVEL, and then press the ENTER
or
►
button.
Press the
▲▼
buttons to select the speaker you want, and then press
the ENTER or ► button.
Each time you press this button, F.L Æ F.RÆ CEN Æ S.L Æ S.R Æ
SBL Æ SBR Æ S.W will be selected in turn.
Press the
▲▼
buttons to set the Speaker Level mode.
You can adjust it from -10 to +10dB in 1 step increments.
The sound gets quieter at -10dB and louder at +10dB.
- To exit setup mode -
Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.
- Setting Speaker Level -
• F.L (front left) : -10 ~ +10dB • SW (subwoofer) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB • SBL (surround back left) : -10 ~ +10dB
• S.L (surround left) : -10 ~ +10dB • SBR (surround back right) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB • FHL (front height left) : -10 ~ +10dB
• CEN (center) : -10 ~ +10dB • FHR (front height right) : -10 ~ +10dB
If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed to the Front Height
Speaker (FHL/FHR).
1.
•
2.
3.
4.
•
5.
•
•
•
M
Æ
Æ
Æ
Æ
HW-C700-C770S-C770BS-XAC_0616.in36 36HW-C700-C770S-C770BS-XAC_0616.in36 36 2010-06-17 10:08:002010-06-17 10:08:00