Filter
Top Products
16
Connections
CONNECTING THE SPEAKERS
Connecting Speaker Wire
Loosen the knob by turning counterclockwise.
Insert the bare part of the wire into the hole in the side of each
terminal.
Tighten the knob by turning clockwise to secure the wire.
Keep the subwoofer speaker out of reach of children to prevent them from inserting their hands or objects
into the duct (hole).
Never touch speaker terminals while the power is on. Doing so could result in electric shock.
Make sure the polarities (+ and -) are correct.
Connecting the Speakers
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into
the red (+) terminal, and then release the tab.
Connect the connecting plugs to the back of the AV Receiver.
Make sure the colors of the speaker terminals on the back of the
AV receiver match the colors of the connecting plugs.
1.
2.
3.
M
1.
2.
3.
•
Black
Red
SURROUND (R)
PS-RC770S
SURROUND BACK (R)
PS-BC770S
FRONT (R)
PS-FC770S
CENTER
PS-CC770S
ACTIVE SUBWOOFER
(BUILT-IN POWER AMPLIFIER)
PS-AW730
FRONT (L)
PS-FC770S
SURROUND (L)
PS-RC770S
SURROUND BACK (L)
PS-BC770S
One Active Subwoofer is provided, if you would like to use another, purchase it from the retailer where you bought
the player and connect it to the other SUBWOOFER OUT Jack.
When using Dolby Pro Logic IIz, connect the Surround Back Speakers (FHL, FHR) to SURROUND BACK/FRONT
HEIGHT Jack.
M
Model HW-C770S/C770BS
AV Receiver HW-C770S/C770BS
FRONT SPEAKER PS-FC770S
CENTER SPEAKER PS-CC770S
SURROUND SPEAKER PS-RC770S
SURROUND BACK SPEAKER PS-BC770S
ACTIVE SUBWOOFER PS-AW730
Model HW-C700/C700B
AV Receiver HW-C700/C700B
HW-C700-C770S-C770BS-XAC_0616.in16 16HW-C700-C770S-C770BS-XAC_0616.in16 16 2010-06-17 10:07:092010-06-17 10:07:09