Filter
Top Products
50
convenient function
51
ENG
● TROUBLESHOOTING
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed
below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest
authorized dealer or Samsung Electronics Service Center.
SYMPTOM Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on
the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and
step motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
The remote control does not
work.
• Is the remote control being operated within its operation
range of angle and distance?
• Are the batteries exhausted?
• Have you selected the mode(TV/DVD) functions of the
remote control (TV or DVD) correctly?
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
Audio language and subtitles do
not work.
• Audio language and subtitles will not work if the disc does
not contain them.
Menu screen does not appear
even when the menu function is
selected.
• Are you using a disc that does not contain menus?
Aspect ratio cannot be changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER
BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be
seen in 4:3 ratio only. Refer to the DVD disc jacket and then
select the appropriate function.
troubleshooting
V-SOUND (VIRTUAL SOUND)
This feature provides virtual surround sound over 2.1 speakers.
Press the V-SOUND button.
Each time the button is pressed, the selection changes as
follows :
V-SO ON
➝
V-SO OFF
S.VOL (SMART VOLUME)
This will regulate and stabilize the volume level against a drastic
volume change when changing channels or during a scene transition.
Press the S.VOL button.
Each time the button is pressed, the selection changes as
follows :
SVOL ON
➝
SVOL OFF
P.BASS/AUDIO UPSCALING
P.BASS
P.BASS function stresses low tones providing thudding
sound effects.
Press the P.BASS/AUDIO UPSCALE button to select
P.BASS mode.
Each time the button is pressed, the selection changes
as follows :
P
BAS ON
➝
UPSC ON
➝
OFF
AUDIO UPSCALING
This also helps enhance your sound experience (ex. mp3 music).
You can upscale your MP3 level sound(24 kHz, 8bit) to CD level sound(44.1 kHz, 16bit).
Press the P.BASS/AUDIO UPSCALE button to select AUDIO UPSCALE mode.
Each time the button is pressed, the selection changes as follows :
P
BAS ON
➝
UPSC ON
➝
OFF
The P.BASS function is only available with 2 channel LPCM sources such as mp3,Divx,cd
and wma.
Press P.BASS button and "POWER BASS ON" will be displayed on the screen.
•
•
•
•
M
HT-X810_NO EUR_0401.indd 50-51HT-X810_NO EUR_0401.indd 50-51 2008-4-9 15:42:132008-4-9 15:42:13