Filter
Top Products
48
radio
49
ENG
● CONVENIENT FUNCTION
LISTENING TO RADIO
Remote Control
Press the TUNER button to select the FM band.
Tune in to the desired station.
Automatic Tuning 1 : When the #,$ button
is pressed, a preset broadcast station is
selected.
Automatic Tuning 2 : Press and hold the ,
,
.
button to automatically search for active
broadcasting stations.
Manual Tuning : Briefl y press the ,
,
. button
to increase or decrease the frequency
incrementally.
Main Unit
Press the FUNCTION button to select the FM band.
Select a broadcast station
.
Automatic Tuning 1 : Press the STOP
(¦) button
to select PRESET and then press the #,$
button to select the preset station.
Automatic Tuning 2 : Press the
STOP
(¦)
button
to select MANUAL and then press and hold the
#,$
button to automatically search the band.
Manual Tuning : Press the
STOP
(
¦
)
button to
select MANUAL and then briefl y press the button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
•
Each time the button is pressed, the sound switches between STEREO and MONO.
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
PRESETTING STATIONS
Example : Presetting FM 89.10 in the memory
Press the TUNER button to select the FM band.
Press the
,
,
.
button to select 89.10.
Press the TUNER MEMORY button.
01 fl ashes in the display.
Press the
#,$
button to select preset number.
You can select between 1 and 15 presets.
5. Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before Number
disappears from the display.
Number disappears from the display and the station is
stored in memory.
6. To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the
#,$
button on the remote control to select a channel.
This unit does not receive AM broadcasts.
1.
2.
•
•
•
1.
2.
•
•
•
1.
2.
3.
•
4.
•
•
•
•
M
SLEEP TIMER FUNCTION
You can set the time that the Home Cinema will shut itself off.
Press the SLEEP button.
SLEEP will be displayed. Each time the button is pressed, the preset
time changes as follows :
➝10 ➝ 20 ➝ 30 ➝ 60 ➝ 90 ➝ 120 ➝ 150 ➝ OFF
To confi rm the sleep timer setting, press the SLEEP button.
The remaining time before the Home Cinema will shut itself off is
displayed.
Pressing the button again changes the sleep time from what you
have set earlier.
To cancel the sleep timer, press the SLEEP button until OFF appears on the display.
ADJUSTING DISPLAY BRIGHTNESS
You can adjust the brightness of the display on the main unit so it won't
interfere with your movie viewing.
Press the DIMMER button.
Each time the button is pressed, the brightness of the front display
will be adjusted.
MUTE FUNCTION
This is useful when answering a doorbell or telephone call.
Press the MUTE button.
MUTE appears in the display.
To restore the sound, press the MUTE button again.
•
•
•
•
•
•
convenient function
HT-X810_NO EUR_0401.indd 48-49HT-X810_NO EUR_0401.indd 48-49 2008-4-9 15:42:092008-4-9 15:42:09