Filter
Top Products
47
ENG
● SYSTEM SETUP
SETTING THE AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio
delay time to to match the video.
In Stop mode, press the MENU button.
Press the Cursor
%
button to move to Audio and then press the
ENTER or + button.
Press the Cursor
%
button to move to AV-SYNC and then press the
ENTER or + button.
Press the Cursor
,
button to select the AV-SYNC Delay Time
and then press the ENTER button.
You can set the audio delay time between 0 ms and 300 ms.
Set it to the optimal status.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
SETTING THE HDMI AUDIO
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
In Stop mode, press the MENU button.
Press the Cursor
button to move to Audio and then press the
ENTER or + button.
Press the Cursor
button to move to HDMI AUDIO and then press
the ENTER or + button.
Press the Cursor
,
button to select ON or OFF and then press
the ENTER button.
• ON : Both video and audio signals are transmitted over the HDMI
connection cable, and audio is output through your
TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only,
and audio is output through the home cinema speakers only.
d
Press the RETURN button to return to the previous level.
d
Press the EXIT button to exit the setup screen.
The default setting of this function is HDMI AUDIO OFF.
HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
SETTING THE AUDIO
Press the SOUND EDIT button and then press the Cursor
,
button.
Adjusting Front Speaker Balance
You can select between 00, -06, and OFF.
The volume decreases as you move closer to –6.
Adjusting Subwoofer Speaker Level
The volume level can be adjusted in steps from +6dB to –6dB.
The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
1.
2.
3.
4.
~
1.
2.
3.
4.
M
`
`
`
`
`
`
MOVE SELECT EXIT
RETURN
MOVE SELECT EXIT
RETURN
MOVE ENTER EXITRETURN
MOVE ENTER EXITRETURN
Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
HT-X710_ELS_ENG_0408.indd 47 2008-04-19 �� 2:39:10