18
connections
CONNECTING THE VIDEO OUT TO YOUR TV
Choose one of the three methods for connecting to a TV.
METHOD 1 : HDMI
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the
HDMI IN jack on your TV.
METHOD 2 : Component Video
If your television has Component Video inputs, connect a Component video cable(not supplied) from the
Component Video Output (PR, PB and Y) jacks on the back of the DVD Player to the Component Video
Input jacks on your TV.
METHOD 3 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the
VIDEO IN jack on your TV.
The resolution from the Component Output is 576i(480i).
If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home Cinema using the TV's
remote control. This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).
Please check the
logo (If your TV has an
logo, then it supports the Anynet+ function.)
M
`
`
`
METHOD3
(supplied)
METHOD2
METHOD1
(supplied)
HT-X710_ELS_ENG_0408.indd 18 2008-04-19 �� 2:38:44