Filter
Top Products
Selecting the Cassette Playback
Mode
Your micro component system has three cassette playback modes which enable
you to listen to both sides of a cassette automatically.
When playing a cassette, a counter is displayed to enable you to take note of the counter value at the start of each track and thus
start playback at the beginning of the track to which you wish to listen.
•
The counter is only displayed when a cassette is being played.
Press REV.MODE until the appropriate symbol is
displayed.
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing COUNTER RESET.
•
: One side of the selected cassette and then stops.
•
: One side of the cassette.
The other side of the cassette and then stops.
•
: Both sides of the cassette indefinitely until you press stop.
Recording a Compact Disc
You can record a compact disc on a cassette in two different ways:
This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.
•
Press the OPEN/CLOSE button
( ) to open the CD door.
•
Insert a CD and press the
OPEN/CLOSE button ( ) to
close the CD door.
•
Press the PUSH/EJECT button ( )
to open the cassette door, insert a
cassette, and then close the cas-
sette door.
•
Insert the cassette with the safety
tabs.
2
1
3
Insert a blank
cassette in Deck.
Switch the system
on by pressing
POWER.
•
When stopped, Press and hold the
button to start the recording from the
first piece of music.
•
Press and hold CD SYNC.( )
button during the playback of CD to
start the recording from the first part
of the music being played.
54
•
Use the CD selection ( , )
buttons to select the desired song.
Load a compact
disc.
Press and hold
CD SYNC.( )
button.
6
To stop recording,
press button.
Press the PLAY
( ) button.
Synchronised recording
56
55
TAPE DECK
Tape Counter
GB
HT-DT79(GB)39-62 4/20/06 10:56 AM Page 56