Filter
Top Products
53
ENG
●
You can play video les stored in the iPod player by connecting it to the
AV receiver.
Connect the iPod dock connector to the iPod jack on the AV
receiver.
In the iPod screen, move to and set the
option to .
Place the iPod in the Dock.
Press the button on the remote control to select mode.
If the iPod player is connected to the AV receiver, each time you press the
the button, it will be toggled in the order of
.
Set the AV IN option of the TV connected to the AV receiver to
COMPOSITE.
Follow the iPod onscreen guide through the following steps.
Press the , buttons on the remote control to select and
press the button.
Press the , buttons on the remote control to select and press
the button.
Press the , buttons to select the le to play and press the
button.
Video les of the iPod player will be played on the TV screen.
You can use the remote control or main unit to control simple
playback functions such as , , , and
/
.
If you press the button within 3 seconds after the playback,
the player will stop playing and return to the list screen.
If you press the button 3 seconds or later after the playback, the player will move to the
start screen of the current le.
Press the button to stop playing and return to the list screen.
Press the button to return to the previous menu.
You must have the VIDEO (Monitor or VCR) output connected to your TV to view iPod video.
See page 26 for compatible iPods.
Compatibility depends on the software version of your iPod.
When the current le is played to the end, the next le will not be played automatically.
To play the next le, select a le to play in the list screen of the iPod player.
No other screen than the playback one will appear on the TV screen. Check other screens on
the iPod player.
~
~
~
~
~
M
`
`
`
`
<iPod Screen>
<iPod Screen>
HT-AS730S-XAC_0213.indd 53 2009-02-16 �� 5:07:33