Filter
Top Products
ENG
36
Presetting radio Stations
You can preset up to 30 FM stations.
Press TUNER button.
Press TUNING MODE button to
select MANUAL and then press
TUNING/CH( ) button to
select 89.10.
•
Refer to step 2, page 38, to tune in
automatically and manually.
Press TUNER MEMORY button.
•
Tuner number will blink on the display.
Press TUNING/CH( ) button
to select preset 2.
•
You can select from presets 1 to 30.
Press TUNER MEMORY button.
•
Tuner number will disappear and station 89.10
will be saved in preset 2.
To preset other stations, repeat
steps 2 to 5.
To Listen to Preset Station
•
Press TUNING MODE button of the remote control to select the PRESET
and press TUNING/CH ( ) button.
E.g.: Setting station FM 89.10 in preset 2 .
1
2
4
5
6
3
,
,
,
36
Press TUNER button.
Selected frequency.
•
Automatic tuning 1
:
1) Press TUNING MODE button to select PRESET.
2) Press TUNING/CH ( ) button to select the preset frequency.
•
Automatic tuning 2 :
1) Press TUNING MODE button to select MANUAL
2)
Press and hold TUNING/CH ( ) button to automatically tune in frequency.
•
Manual tuning
:
1) Press TUNING MODE button to select MANUAL.
2) Press TUNING/CH ( ) button briefly to increase or decrease the
frequency step by step.
REMOTE CONTROL
1
2
,
,
,
Press FUNCTION button to select FM.
Select the frequency.
•
Automatic tuning 1
:
1) Press TUNING MODE button to select PRESET.
2) Press TUNING/CH ( ) button to select the preset frequency.
•
Automatic tuning 2 :
1) Press TUNING MODE button to select MANUAL
2)
Press and hold TUNING/CH ( ) button to automatically tune in frequency.
•
Manual tuning :
1) Press TUNING MODE button to select MANUAL.
2) Press TUNING/CH ( ) button briefly to increase or decrease the
frequency step by step.
MAIN UNIT
1
2
,
,
,
Listening to radio
You can listen to the chosen band (FM) by using either automatic or manual tuning.
To Listen to mono/stereo
Press MO/ST button on the remote.
•
Each time you press this button, STEREO ➝ MONO will be selected in turn.
•
If you select MONO in an area with weak reception,
it will help to reduce noise.
•
This function works only with the Remote Control.
37
RADIO OPERATION
HT-AS720S-XAC-ENG 2008.1.25 3:17 PM Page 36