Filter
Top Products
¥
The word INVALID appears on screen!
If this message appears on the TV screen while buttons are being
operate, the operation is not possible with that particular disc.
¥
If your TV model is not SAMSUNG, refer to “Remote Control Unit
Setup” on page 26.
Before Using the DVD Player
12
Connections
11
AV OUT
Y/C
COMP.
R-FRONT-L
6
R
L
VIDEO
VIDEO OUT
ANTENN
AM
FM
75
COAXIAL
A
S-VIDEO
LR
SPEAKERS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
VIDEO IN
TV
External Analog
Components
Audio Cable (Red/White)
AUX Connections
Picture can be shown
only when the TV’s video
input connector (VIDEO
IN) is connected to the
VIDEO OUT connector.
Connect to external equipment with
analog output.
Example: Video, TV, LDP, etc.
¥
Always connect the video and
audio connection cables to the
equivalent colored jack.
Press the AUX button and select AUX IN.
Making Digital/Analog Input Selection
Press the Function button and select AUX IN.
Remote Control
Main Unit
¥
Your DVD player can also play CD-R and CD-RW discs recorded in digital
audio format. When recording your own CD-R or CD-RW discs, make sure that
the recording session is properly terminated, or they will not be playable.
(Depending on disc properties and recording quality, some CD-R/RW may not
be playable.)
¥
CD-RW has a lower reflection rate than CD-R media and consequently it will
take a longer to read CD-R discs.
¥
CD-RW discs recorded at high speed tend to be difficult for the DVD player to
read. If the recording speed for the CD-RW disc is not predetermined, write it
at low speed.
CD-R/RW playback compatibility
Your DVD player is capable of playing DVD, VCD, and CD discs.
User instructions may vary depending on the type of disc. Read the instructions
carefully before use.
Use these connections if necessary.
TV
TV/VIDEO
DVD
Prepe-
rations
before
use
Turn on the power
to your DVD player
and TV.
1
Select a video mode by
pressing the TV/VIDEO
button.
2
Press the DVD button
to select the DVD input
function.
3
Zoom
TV System
TV System Selection
Press the TV System button while in stop mode.
¥
Each time the TV System button is pressed, “NTSC, PAL” are
selected in this order.
Different countries use different types of TV broadcast systems, video,
audio and channel systems.
Example : The player cannot playback PAL-encoded DVD with NTSC-TV.
If the external analog
component has only one
output jack, you may
connect either L or R.