Filter
Top Products
23
Setting the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
•
"CLOCK" is displayed.
2
Press TIMER/CLOCK
twice.
1
Switch the system on
by pressing POWER
button.
•
"TIMER" appears in the display.
•
The current time is now set.
5
When the correct
time is displayed,
press ENTER.
•
Increase the minutes :
•
Decrease the minutes :
4
When the correct
hour is displayed,
press ENTER.
The minutes flash.
•
Increase the hours :
•
Decrease the hours :
3
Press ENTER.
The hour flashes.
•
You can display the time, even when you are using another function, by pressing
TIMER/CLOCK once.
•
You can also use on the main set instead of buttons in step 3,4.
Note
Checking the Remaining Time
Each time the REMAIN button is pressed ,
the time is displayed as below:
Press the REMAIN button.
•
For checking the remaining time of a title or chapter
being played.
DVD
CD MP3
TITLE REMAIN TIME
CHAPTER REMAIN TIME
ELAPSED TIME
Press the REMAIN button.
If you press the REMAIN button,
the remaining time is displayed.
To cancel this function, press the
REMAIN button again.
MM-C430D-530D-XAC-i-MIC-ENG-1.indd 26MM-C430D-530D-XAC-i-MIC-ENG-1.indd 26 2010-6-10 8:35:562010-6-10 8:35:56