Filter
Top Products
25
To return to auto clock set mode
1. Press the On / Standby button to switch on the sound system. If
necessary press and release the DAB/FM button to put the sound
system into DAB mode.
2. Press and hold the Menu button to enter the setup menu. "MANUAL"
will appear on the display.
3. Rotate the Tuning control until "CLOCK" appears on the display.
Press and release the Tuning control.
4. Rotate the Tuning control until "AUTO CLK" appears on the display.
Press and release the Tuning control.
5. The sound system will immediately set its time according to the
information received with the DAB broadcast. The radio will return to
normal radio operation with the time currently displayed.
Note: If you select "AUTO CLK" the current time received will be displayed.
If no DAB signal is found, "NO DABCK" will be displayed. You should
then either position the sound system or its aerial so that a signal can be
received, or revert to manual clock mode (see page 23).
1
2
3,4