Filter
Top Products
10
S curve 131 System Configurations
Using Two S curve 131’s for Mains and Monitors
In this example two S curve 131’s are used for the stereo main and for the 2-channel monitor mix. The mixer’s left and right outputs are connected to the first pair of S curve 131’s
inputs for the main PA speakers. Then, the outputs are connected to the inputs of the active (self-powered) loudspeakers. For the monitor mix, the mixer’s AUX1 output is connected
to the third S curve 131 and AUX2 output is connected to the fourth S curve 131’s input. Then, the outputs are connected to the inputs of the 2-channel power amp. Finally, the power
amplifiers outputs are connected to the passive (non-powered) monitor loudspeakers.