Filter
Top Products
8
S curve 131 System Configurations
Using the S curve 131 with Active Speakers
In this example the mixer’s mono output is connected to the S curve 131’s input. Then, the S curve 131’s output is connected to the input of
the first active (self-powered) loudspeaker. The second loudspeaker is connected to the first using the first loudspeaker’s extension output.
Using the S curve 131 with Passive Speakers
In this example the mixer’s mono output is connected to the S curve 131’s input. Then, the S curve 131’s output is connected to the input of a
2-channel power amp running in mono “bridge” mode. Next, the power amplifier’s mono output is connected to the passive (non-powered)
loudspeakers. (See the owners manual for your specific power amplifier for the proper bridge mode operation.)