Filter
Top Products
S83/S63 Features
• A phantom power switch enables you to use the S83 and S63 with high-
quality condenser microphones. When turned on, 48 volts of phantom
power is provided to the mic connectors of all input channels.
• Protection relay circuitry prevents “thumps” when powering on or off. This
means that you can use the S83/S63 with a single power strip into which
other audio devices are connected, without danger of damage to connected
speakers.
• A rear-panel amplifier input allows you to bring external signals from other
mixers or audio devices into the S83/S63 power amplifier.
• A rear-panel preamplifier output allows you to connect the S83/S63 to exter-
nal power amplifiers when higher power ratings are required and/or when
additional amplifier feeds are necessary.
• In the S83, a built-in headphone amplifier, with a front-panel 1/4” stereo
connector and dedicated level control allows you to monitor your main mix.
• In the S83, a convenient front-panel meter allows you to see at a glance the
continuous output signal level.
We’ll elaborate on many of these terms and features later in this manual. Now
it’s time to take a guided tour of the units, starting with the S83.
3