Samson S63, S83 Stereo Amplifier User Manual


 
1: Return 1-2 Level (green) - This knob determines the input level of signal
arriving via Effects returns 1 and 2 (mixed together in mono). This signal is at
unity gain (no boost or attenuation) when the knob set to the 0 position and is
boosted when the knob is turned to the right of 0 and attenuated when turned to
the left of 0. For information on how to properly set this, see the sections in this
manual entitled Setting Up and Using the S83/S63 and Using the Effects
Sends and Returns.
2: Monitor Level (green) - This knob determines the overall level of the signal
being output from the rear panel Monitor jack. The amount of signal sent is
increased as the knob is turned clockwise. For more information, see the Using
the Effects Sends and Returns section in this manual.
3: Reverb Level (green) - This knob determines the level of the return signal
from the internal reverb unit. The amount of incoming reverb signal is increased
as the knob is turned clockwise. For more information, see the Using the
Effects Sends and Returns section in this manual.
12
Guided Tour - S63 Main Section
30Hz 64Hz
125Hz 250Hz 500Hz 1K
2K
3K 5K 10K
+15dB
0dB
-15dB
30Hz 64Hz
125Hz 250Hz 500Hz 1K
2K
3K 5K
PHANTOM
+10
RETURN 1-2
0
MAIN LEVEL
0
10
REVERB
−∞
+10
MONITOR
0
−∞
CD/TAPE
IN
PEAK PROTECTION POWER LEFT RIGHT
10K
1
2
3
4
5
6
7
89 10
11
+10
0
−∞