Samson PA324 Stereo Amplifier User Manual


 
Specifications
SPECIFICATIONS
Rated Output power 150W/4@0.5% THD at 1KHz per amplifier
Frequency response 20Hz~20KHz+/-0.5dB@1W Output into 8 (AMP OUT)
20 Hz~20KHz+/-0.5@+4dB Output into 10 (MAIN OUT,
MONITOR OUT, EFX SEND)
Total Harmonic Distortion Less than 0.19%@20Hz~20KHz, 75W output into4 (AMP
OUT)
Less than 0.1%@20 Hz~20KHz+14dB output into 10K
(MAIN OUT, MON OUT, EFX SEND)
HUM & Noise -127dB equivalent input noise
(Average, RS+150) -100dB residual output noise (MAIN OUT, MONITOR OUT, EFX
OUT)
(with 20Hz~20KHz BPF) -79dB (MAIN OUT, MONITOR OUT) Master level control at
maximum all channel level control at minimum.
-79dB (EFX OUT) Master level control at maximum all channel
level controls at minimum
Maximum Voltage Gain 84dB CH IN (Lo-Z) to AMP OUT
66dB CH IN (Lo-Z) to MAIN OUT, MONITOR OUT
72dB CH IN (Lo-Z) to EFX OUT
48dB CH IN (Lo-Z) to REC OUT
56dB CH IN (Hi-Z) to MAIN OUT, MONITOR OUT
26dB AUX IN to MAIN OUT
24dB TAPE IN to MAIN OUT
Crosstalk 1KHz 70dB adjacent input, 70dB input to output
Input Channel Equalization HIGH 12KHz shelving (+/- 15dB Maximum)
MID 2.5KHz peaking (+/- 15dB Maximum)
LOW 80Hz shelving (+/- 15dB Maximum)
Meters 7 POINT LED METERS (-20, -10, -7, -4, 0, +3, +6dB)
Graphic Equalizer 7 bands (63, 160, 400, 1K, 2.5K, 6.4K, 16KHz)
Internal DSP Effects 24 BIT - 8 Presets: 1 - Large Hall; 2 - Medium Hal;, 3 - Large
Room; 4 - Vocal Room ; 5 - Vocal Room 2; 6 - Chorus +
Reverb; 7 - Chorus + Delay; 8 - Stairwell
Phantom Power +48V
CLIP Indicators Turn on: THD> 0.1%
Foot Switch DIGITAL EFFECT MUTE: ON/OFF
GENERAL
Power Requirement 110V-240V, 50/60Hz
Power Consumption 540W
Weight 32.3 lbs./14.7Kg
Dimensions 489mm(W) x 286mm(H) x 289mm(D)
19