Filter
Top Products
31
ST2-XM TUNER PROGRAMMING
ST2 TUNER SETUP MENU
Press TNR SEL
button to select
XM Tuner
XM Setup Menu
Controller, Diagnostics, Factory Initialization
and System Info Procedures
TNR
SEL
TNR
SEL
MEM
NAME
Procedure
TNR
SEL
BANK
NAME
Procedure
XM
Setup
Menu
FACTORY
INIT
Procedure
CONTROLLR
ID
Procedure
SYSTEM
INFO
Procedure
DIAGNOSTICS
Procedure
This
Procedure
returns the
ST2 Tuner
to its
Factory
settings
Please
Wait
Cycle Power
YES
SOURCE
NUM
Procedure
FACTORY
INIT
Procedure
UPDATE
FIRMW
Procedure
SYSTEM
INFO
Procedure
TUNER
SETUP
Menu
Chassis
Setup
Menu
This
Procedure
is for
Factory
use
ONLY
Are you
sure?
Yes or No
NO
All Contrlrs
TNR
SEL
System Info (XM)
The System Info menu shows the ST2 Tuner’s
manufacturing build properties.
1. Enter the Setup Menu by pressing and holding
the TNR SEL button.
2. TUNER SETUP appears. Press MEM Up/Down
until SYSTEM INFO appears on the tuner.
3. Press BAND.
4. Press BAND at “Build Time” to view.
5. Press MEM Up/Down to advance.
6. Press BAND at “Build Date” to view.
7. Press MEM Up/Down to advance.
8. Press BAND at “Version” to view.
9. Press TNR SEL to exit the System Info menu.
(END OF XM TUNER SETUP)
Tuner Setup Menu for AM/FM
It is important to select the desired tuner
(Tuner 2 for AM/FM) using the TNR SEL
button BEFORE accessing the Tuner Setup
Menus.
Memory Name (AM/FM)
A memory preset
must
be created and saved
before it can be named (see page 19). Once it is
saved, the preset’s Tuner #, Bank # and Memory
# must be entered in the following procedure.
(continued)