Filter
Top Products
10
ST2 Tuner
CAV6.6
UNO-S2
keypads
RCA Cable
64:The Groove
Source Connections with CAV6.6 Controller/Amplifier (RNET System)
The diagram depicts a typical setup using the ST2-XM Tuner with a CAV6.6 amplifier. Each tuner in
the ST2 unit must be connected as a separate source for audio inputs. UNO-S2 keypads are connect-
ed to the CAV6.6 keypad ports, NOT the ports on the ST2 Tuner.
ST2-XM SETUP AND CONNECTIONS
ST2-KP AND CAV6.6 CONNECTIONS
CAT-5 Cable
ST2-KP Connections to ST2-XM Tuner (Non-RNET Systems)
The diagram depicts a standard ST2-KP keypad connection to the keypad port on the back of the
ST2-XM. The keypad uses a 110 punchdown connection and an RJ-45 T568A connection to the tuner.