Filter
Top Products
29
ST2-XM TUNER PROGRAMMING
ST2 TUNER SETUP MENU
Tuner Setup Menu for XM
It is important to select the desired tuner
(Tuner 1 for XM) using the TNR SEL button
BEFORE accessing the Tuner Setup Menus.
Memory Name (XM)
A memory preset
must
be created and saved
before it can be named (see page 19). Once it is
saved, the preset’s Tuner #, Bank # and Memory
# must be entered in the following procedure.
1. Enter the Setup Menu by pressing and holding
the TNR SEL button.
2. TUNER SETUP appears. Press BAND again.
3. MEMORY NAME appears on the tuner.
4. Press BAND.
5. Bank # appears.
6. Press the Tune Up/Down buttons to select the
Bank #.
7. Press BAND to advance. Memory # appears.
8. Press the Tune Up/Down buttons to select a
Memory #. (continued)
Press TNR SEL
button to select
XM Tuner
BANK #
BANK
NAME
SAVE
CHANGES?
XM Setup Menu
Bank Name Procedure
TNR
SEL
Selects
character
Selects
character
position
Repeat
for each
character
in name
TNR
SEL
TNR
SEL
MEM
NAME
Procedure
TNR
SEL
BANK
NAME
Procedure
XM
Setup
Menu
FACTORY
INIT
Procedure
CONTROLLR
ID
Procedure
SYSTEM
INFO
Procedure
DIAGNOSTICS
Procedure
SOURCE
NUM
Procedure
FACTORY
INIT
Procedure
UPDATE
FIRMW
Procedure
SYSTEM
INFO
Procedure
TUNER
SETUP
Menu
Chassis
Setup
Menu