Filter
Top Products
41
INSTALLER
MAKING CONNECTIONS
RNET Link In and Link Out - RNET-enabled Components
The RNET Link In and Link Out is also used to
connect the CAV6.6 to other Russound
RNET-enabled products. The connection is made
using a CAT-5 patch cable from the Link Out of
the controller and into the Link In of the RNET-
enabled component. Another CAT-5 patch cable
can be used to link out of that component and
link into another RNET-enabled component in the
system.
RNET-enabled components fully integrate with
CAV6.6 and CAM6.6 multi-zone systems. They
communicate through the RNET Link In and Link
Out connection. These components can be con-
trolled via the UNO keypad or the UNO-LRC1
remote control, and display source information
on the keypads. The CAT-5 patch cable should
not exceed 18 inches in length.