Filter
Top Products
Controls and Functions
Q-750i Series Installation/Operation Manual 9
PRE
L
IMINAR
Y
1. LIGHT
Press to illuminate the buttons.
2. ON / OFF
Use these buttons to turn the projector on or off.
3. Source Selection Buttons:
VID
Press to select Composite video input as the source.
S-VID (S-Video)
Press to select the S-Video input as the source.
HDMI 1 / HDMI 2
Press to select an HDMI input.
HD 1 / HD 2 / HD 3
Press to select the “HD 1,” “HD 2” or “HD 3” video input as the source. By default,
these buttons are assigned to the COMPONENT
1, COMPONENT 2 and RGB video
inputs respectively; however, you can re-assign these buttons to other inputs. For
more information, refer to
HD 1 Key / HD 2 Key / HD 3 Key on page 66.
4. INFO
Press to display input signal and product information.
Cursor Keys ( , , , )
Use these buttons to select items or settings, adjust settings or switch display
patterns.
EXIT
Press to save menu item setting(s), exit the current menu and return to the previous
one.
ENTER
Press to select a highlighted menu item or confirm a changed setting.
MENU
Press this button to show or hide the OSD controls.
5. Picture Adjustment Buttons:
BRT (Brightness)
Press to adjust black level.
CONT (Contrast)
Press to adjust white level.
COL (Color)
Press to adjust color intensity.
TNT (Tint)
Press to adjust color hues.
➤
➤
➤
➤