Filter
Top Products
Specifications
78 Runco LS-7 Installation/Operation Manual
P
RELI
M
INARY
Performance
Microdisplay: Texas Instruments DLP® 1280x720 DMD (x 3)
Native Resolution: 1280 x 720 (921,600 pixels)
Aspect Ratios: Native (Pixel-to-Pixel), 16:9, Letterbox, 4:3, 4:3 Narrow,
Letterbox (Anamorphic lens compatible)
Projection Lens: F/3.5, 25.5~32.0mm focal length
Throw Ratios: 1.85 – 2.40 (distance/width) – Standard lens
1.56 – 1.86 (distance/width) – Optional short-throw lens
Vertical Lens Shift Range: 65% of screen height above or below lens center
(130% of one half of the screen height)
Horizontal Lens Shift Range: 30% of screen width left or right of lens center
(60% of one half of the screen width)
Video Lumens: 2,000 ANSI lumens (average) calibrated at D65
Sequential Contrast –
ConstantContrast On:
20,000:1 typical
Cooling Performance: High efficiency adaptive voltage side-to-side cooling
with low system acoustic noise level and low light
pollution cabinet
Projection Modes: Front, Rear, Ceiling (front/rear)
Lamp: User replaceable 230/260W HPM (selectable), 2500
hour lifetime at 230W setting
Video Processing: Runco advanced ViVix processing with 10 bit
independent dual channel image processing, true 1080i
deinterlacing, MPEG artifact reduction (block and
mosquito noise), latest motion adaptive processing, 3D
noise reduction, detail enhancement, rich color
processing and noise reduction, less than one frame
latency
Calibration: Full RGB gain/offset control (White Balance), Gamma,
Contrast, Color Temperature, Brightness
Table 7-1. LS-7 Specifications (continued)