Filter
Top Products
Operation
Runco LS-7 Installation/Operation Manual 55
PRE
L
IMINAR
Y
ControlSelect Control from the Main Menu to set various options related to control of the
projector.
Figure 4-15. LS-7 Control Menu
Lens Control: Select Lens Control from the Control menu to perform lens adjustments
(focus, zoom and lens shift). For detailed instructions, refer to Lens Adjustments on
page 27.
1 Key / 2 Key / 3 Key / 4 Key / 5 Key: These menu items assign the function of the
keys numbered 1 through 5 on the remote.
There are eight sources corresponding to the eight connections to the projector. When
you assign a source to a numbered key, the projector immediately goes to that source
when the key assigned to it is pressed.
If the chosen source is disabled via the Source Enable menu (refer to page 52), this setting
has no effect.
M1 Key / M2 Key / M3 Key: These menu items assign which memory setting to recall
when the M1, M2 or M3 key on the remote is pressed.