Filter
Top Products
8
RCD-06 SE Stereo Compact Disc Player
CLEAR Button
H
Remote Only
This button allows you to remove a track selection from the memorized
program play list during the review procedure described above. Follow
the review procedure until the desiredtrack number is flashing. Then,
instead of pressing the REVIEW button to continue, remove thedisplayed
track by pressing the CLEAR button while the number is still flashing. You
may then continue the review procedure.
RANDOM Button
D
Remote Only
This instructs the CD player to play tracks from the entire disc in random
order. Once all of the selections have been played once, the disc will
stop playing, unless the REPEAT Button (see below) has been engaged,
in which case the random play will continue until the STOP button is
pressed. When the RANDOM button is engaged, the word RANDOM
appears in the Display.
REPEAT Button
C
Remote Only
This button allows you to repeat the current track or the entire disc
continuously until the feature is cancelled by disengaging the REPEAT
button or pressing STOP. the REPEAT button steps sequentially through the
available options. Press the button once and the RCD-06 SE will repeat
just the current track, displaying the indicator REPEAT 1 in the Display.
Press the button a second time and the RCD-06 SE will repeat the entire
disc, displaying REPEAT ALL in the Display. Press the button a third time
to cancel the REPEAT function.
As noted above,REPEAT can be used in conjunction with the RANDOM
play feature.
Note: The REPEAT function is automatically cancelled when the disc
drawer is opened.
SCAN Button
E
Remote Only
This feature automatically plays the first ten seconds of each track on
the disc (or the memorized program). To activate the feature, press the
SCAN button. The word INTRO appears in the Display. To stop scanning
and resume normal operation at the current track, press the SCAN button
again or press the PLAY button.
TIME Button
G
Remote Only
Normally, the RCD-06 SE displays the elapsed time of the currently playing
track. The TIME button allows you to step through two alternative time
displays. Pressing the button once displays the time remaining in the
current track, which counts down as the track continues playing. Pressing
the button a second time displays the time remaining on the entire disc
(or memorized program). Pressing the button a third time reverts to the
standard elapsed time display. When the TIME feature is activated, the
word REMAIN appears in the Display.
Additional Features
These convenience features add extra functionality to the RCD-06 SE,
including the ability to memorize a group of tracks to be played, to repeat
a disc, program, or track over and over, to play the tracks on a disc in
random order, to automatically play the first 10 seconds of each track,
and to select from several available time displays.
PROGRAM Button
J
Remote Only
This button,labeled PROG, allows you to memorize as many as 20 tracks
on the current disc for playback in a specific order.For example, you could
instruct the RCD-06 SE to play track 5,followed by track 3, followed by
track 8. To begin a program:
Insert a disc and press the OPEN/CLOSE button to close the drawer. 1.
The RCD-06 SE will read the contents of the disc.
Press the PROG button on the remote control.The PROGRAM indicator 2.
will light up in the Display, along with “P:00” indicating that the
unit is waiting for the first track to be memorized.
Enter the first track number using the DIRECT ACCESS buttons.3.
Your selection will be memorized automatically and the Display
indicator will change to “P:01”, indicating that one track has been
memorized. Continue entering the rest of your selections using the
DIRECT ACCESS buttons. Note that there is no need to press the
PROG button as each selection is memorized as it is entered.
Once you have memorized a play list,the RCD-06 SE remains in PROGRAM
mode until you open the disc drawer or press the STOP button twice in
succession.If you press the PLAY button, the memorized program will
play instead of the entire disc, starting with the first selection in the
memorized list.
When a PROGRAM has been memorized,most functions that would
normally affect the entire disc operate on just the memorized program. For
example, the TRACK buttons advance to the next track in the memorized
program, not the next track on the disc. Likewise, the REPEAT button (see
below) continuously plays the memorized program, not the entire disc.
REVIEW Button
I
This button is used to review the memorized tracks in PROGRAM mode.
Press the button and the first memorized track number will appear in
order in the Display, flashing for approximately five seconds. Pressing
the REV button again while the track number is flashing will continue the
review sequence, showing the next memorized track.Continue pressing
the REVIEW button to see the complete memorized track list.
If you do not press the REVIEW button while the track number is flashing,
the review process is terminated and the unit resumes whatever mode it
was in before you started to review, except that the last reviewed track
number will remain active and shown in the display.
Note that you may remove a selection from the play list during the review
procedure using the CLEAR button, as described below.