Filter
Top Products
SPECIFICATIONS
output power 60 WPC
frequency response 10Hz - 20 kHz
THD < 0.1% typical
< 1% at rated power
input sensitivity 1.0 V RMS
dimensions 18 ¼” W x 15 ¾” D x 7” H
weight 60 Lbs
power requirements 115/230V - 50/60Hz
INTRODUCTION
Congratulations on your purchase decision! We at Rogue Audio truly
believe that our amplifiers provide the “smartest” value in high-end
audio. If you have never owned a vacuum tube amplifier you will be
thrilled by the silky-smooth sound and incredible detail that only a
tube amplifier can provide. And with your Rogue Audio amplifier,
you can be sure that you are getting the very best in tube
amplification. We at Rogue Audio are extremely proud of our
products and want you to enjoy them to their fullest potential. So
please, take the time to read through this short manual so that you can
be confident that you have set up your amplifier properly
.
SETTING UP YOUR AMPLIFIER
tools required: phillips head screwdriver and a clean glove or cloth.
WARNING - This amplifier uses voltages that could cause
injury or death. Never open the amplifier while it is
plugged in, and always wait at least one hour after turning
the unit off to unplug and open the unit. Lethal voltages
can remain in the electronics after the unit is unplugged.
1) Opening the box - Carefully remove the amplifier from the box.
It is important that you retain the packing material and box in the
event that the amplifier ever needs servicing. The packing
material and box have been carefully designed to protect your
valuable equipment during shipping so you don’t want to throw
them away!
Rogue Tempest Owners Manual 1 Rogue Tempest Owners Manual 12