Filter
Top Products
– 26 –
T
ROUBLESHOOTING
Amplifier does not
turn on
(Power LED is off)
Symptom Diagnosis Remedy
Voltage applied to the REM
terminal of the amplifier is
not between 10.5 and
15.5 volts or there is no
voltage present.
Voltage to the B+ terminal
of the amplifier is not be-
tween 10.5 and 15.5 volts
or there is no voltage
present.
Amplifier is not properly
grounded.
Amplifier has no
sound
(Power LED is on)
RCA Input from source unit
is not connected or not
functioning properly.
XCard is missing or not
placed properly in cross-
over slots.
Speaker leads are shorted
to each other or to the chas-
sis of the vehicle.
Speakers are defective.
Check connections, substitute
with known working source and
cables and repair or replace as
necessary.
Check XCard position and re-
pair or replace as necessary.
Disconnect existing speakers
and test with known working
speakers and wires. If amplifier
plays, check and repair wiring
and installation of speakers as
necessary.
Disconnect existing speakers
and test with known working
speakers. If amplifier plays,
check and repair speakers as
necessary.
Check the alternator, battery,
fuse, and wiring and repair as
necessary. If the voltage is
above 15.5 volts, have the elec-
trical system inspected by an
authorized car service center.
Check the alternator, battery,
fuse, and wiring and repair as
necessary. If the voltage is
above 15.5 volts, have the elec-
trical system inspected by an
authorized car service center.
Check wiring and repair as nec-
essary.
TROUBLE-
S
H
O
O
T
I
N
G