Filter
Top Products
5
EN
Quick Start
Sound Features
4
EN
Display
Bass Boost
Press B.BOOST to turn on/off boosting the bass
frequency. The X-BASS icon lights on the display
when it is activated.
Muting Audio
Press on the remote to cut and restore the
sound. “MUTE” flashes on the display when
sound is cut.
EQ
Press EQ on the remote control to select among
FLAT, ROCK, POP, JAZZ, CLASSIC and CUSTOM.
Corresponding icon lights on the display (except
FLAT).
Creating a Custom Curve
1. Press EQ on the remote control to select
CUSTOM mode.
2. While “CUSTOM” is displayed, press or
to select between “BAS” (bass) and “TRE”
(treble) range levels.
3. While “BAS” or “TRE” is displayed, adjust
volume to set the associated gain between -10
and +10.
1
5
6
7
8
9
10
11
423
1. Sound features
2. Recording in progress
3. Playback in progress or paused
4. Timer or sleep function activated
5. Playback modes activated
6. File and folder icons
7. Radio frequency unit
8. Disc trays
9. Track playback time, radio frequency, clock
time, file information etc.
10. File format
11. Radio bands and FM stereo signal received
Refer to the following for basic playback and
radio listening. For detailed operations and more
advanced features, please refer to relevant
sections.
Discs Playback
1. Press SOURCE repeatedly to select CD mode.
2. Press OPEN/CLOSE to open the disc
compartment.
3. Insert up to 5 discs with label face up.
4. Press OPEN/CLOSE again to close the disc
compartment.
•The occupied disc tray icons lights on the
display and the current disc icon flashes on the
display.
• If the disc is a mp3 / WMA CD, the respective
mp3 and WMA icon lights on the display.
5. Press in stop mode to begin
playback. Press during playback to pause and
again to resume playback.
6. Press or to skip to the previous or
next track or file. Press and hold to search
through a CD while it is playing.
7. During playback, press to stop playback.
Playing and Loading Discs
Simultaneously
1. Press OPEN/CLOSE to open the disc tray
while a CD is playing.
2. Load/change discs for available trays.
3. Press OPEN/CLOSE again to close the tray.
Selecting Discs
•Press DISC 1 / DISC 2 / DISC 3 / DISC 4 or
DISC 5 on the main unit to select disc.
•Press DISC SKIP on the remote control to skip
discs.
USB Playback
1. Insert a USB device to the USB connector at the
front of the unit.
2. Press SOURCE repeatedly to select USB mode.
3. Press in stop mode to begin
playback. Press during playback to pause and
again to resume.
4. Press or to skip to the previous or
next track or file. Press and hold to search
through a CD while it is playing.
5. During playback, press to stop playback.
Listening to Radio
1. Press SOURCE repeatedly to select TUNER
mode.
2. Press BAND to select between FM or AM
radio band.
3. Press until you see “PROG” icon disappear
from the display.
4. Press or to select frequencies.
5. Press FM ST on the remote control to select
between FM mono and stereo mode. “STEREO”
icon shows on the display in stereo mode.
Listening to Auxiliary Input
1. Connecting External Device
Insert audio cables (not included) to the L (left
channel) and R (right channel) input jacks on
the back of the unit.
2. Selecting and Playing External Device
Press SOURCE to select AUX mode. Control
playback on your external device. Adjust
volume on the main unit or the remote
control.
RS2047EN 3/1/06 1:53 PM Page 10