Filter
Top Products
Unpacking the system
You should have the following:
• one main unit (with 2 main speakers);
• one remote control;
• one AM loop antenna;
• one user’s guide;
• one safety leaflet;
• owner registration Card.
Unit Back Connections
1. AM Loop antenna Jacks.
2. FM Pigtail Antenna.
3. AUX IN
4. Main Speaker Jacks.
Using the FM and AM Antennas
Before you use your audio system, you’ll want to
make sure both the FM and AM antennas are
positioned properly. Uncoil the FM antenna at
the back of the unit, making sure it is fully
extended (you may even want to tape it to the
wall behind the unit if possible. The higher the
better.) You’ll also need to connect the AM
antenna loop to the back of the unit if you listen
to AM stations. Rotate the AM loop antenna for
better reception.
Connecting the Speakers
Each speaker has a black (negative) and a red
(positive) jack. When connecting the speakers,
match the red wires to the red jacks and the
black wires to the black jacks.
Installation
To ensure sufficient ventilation, keep the spacings
shown below free from other surfaces:
3
EN
General Controls
2
EN
Getting Started
Release tab to lock wire in
the terminal.
NOTE: Make sure the insulation
is completely removed from the
ends of the
speaker wires at all connection
points.
Speaker
Wire Connection
Push Speaker terminal tab
down to insert wire.
1
2
3
Refer to the actual unit or remote control
while you are reading below descriptions.
Some keys may have extra functions in
specific operation.
Front View
ON/STANDBY - turns power on or off (STANDBY
mode). In STANDBY mode, press to turn the
system on in the previously used mode.
CD INFO - selects display information (such as
elapsed playback time) of currently playing CD,
ID3 tag of mp3/WMA files and memory usage in
USB mode.
BAND - selects tuner bands; enters auto preset
program in FM mode.
(skip backward) - goes to the previous
track or file (CD and USB modes); selects the
previous program location; tunes down radio
frequency; selects the previous radio preset
station and decreases hour and minute digit in
clock setting.
(skip forward) - goes to the next track or
file (CD and USB modes); selects the next
program location; tunes up radio frequency;
selects the next radio preset station and increases
hour and minute digit in clock setting.
(play/pause) - plays and pauses playback.
(stop) - stops playback or recording; returns to
the first track on a mp3/WMA disc; selects tune or
preset mode when listening to the radio.
SOURCE - selects among CD player, tuner, USB
and AUX modes. Look at the display icons to
identify the current mode.
DEMO - turns the feature demonstration on or
off.
OPEN/CLOSE - opens or closes the disc tray.
DISC 1 - 5 - select corresponding disc tray.
Top View
- VOLUME + - adjusts volume; navigates through
folders and files in navigation mode.
PHONES - jack for connecting headphones
CD REC - starts and stops CD to USB recording.
SELECT - enters navigation mode in CD and USB
mode.
DELETE - deletes programs; removes files from
USB device.
BACK - navigates backward during file
navigation.
Remote Control
ON/STANDBY, SOURCE, CD INFO, BAND,
OPEN/CLOSE, , , , - same
function as the corresponding key on the main
unit.
(navigation keys) - move in indicated
direction during file navigation. Refer to “Track
and Files Navigation” for details.
B.BOOST - turns on or off Bass Boost.
FM ST - selects between stereo and mono sound
in FM tuner mode.
EQ - selects equalizer presets.
- cuts and restores audio output.
VOL or - decreases or increases volume.
DISC SKIP - skips to next disc tray.
PROG - enters program mode for CD, USB and
tuner modes; applies new settings for clock and
timer; confirms editing name in file renaming.
INTRO - turns intro mode on or off to play the
first 10 seconds of each track in CD and USB
modes.
CLOCK - enters clock setting mode; shows clock
time.
ADD - selects tracks or files into program.
- turns on/off random listening in CD and USB
modes.
TIMER - enters timer setting mode; turns timer
on/ off.
DEL - deletes programs; removes files from USB
device.
REPEAT - selects repeat mode.
SLEEP - selects the time interval in minutes
before the unit turns off.
Installing Batteries
The remote control must be inserted with 2
"AAA" or "UM-4" or "R03" batteries prior to use.
4
4”
4”
Front View 4”
4“
2“
Side View
RS2047EN 3/1/06 1:53 PM Page 8