Chapter 3: Recording CDs
Chapter 3 21
Recording and Dubbing Reminders
Digital / Optical Recording
• After digital recording (Dubbing, Make CD or recording from an external CD player)
is complete, and the copied CD is finalized, it will contain copy protection
information on the disc. COPY PROTECT appears when the finalized CD is inserted
into tray A.
• When using an external source CD player to make recordings, copy protected CDs
can only be recorded through the analog output and inputs. When attempting a
digital recording by using CD SYNC or REC, COPY PROTECT appears and output is
heard but recording doesn’t start.
• When dubbing or using MAKE CD to copy a copy protected CD, the recorder will
only record at normal speed. Even when selecting 2x dubbing, the recorder will
change automatically to 1x dubbing. COPY PROTECT appears.
CD Disc Dubbing
• When finishing a recording, the table of contents (TOC) will be longer compared to
the original CD’s TOC. This is because the CD recorder also includes the time
between tracks.
• If a CD-R audio only disc is inserted in tray B and is not blank or finalized, NOT BLK
DISC appears.
• If copy protection information is found on the disc, the unit will select an analog
dubbing mode.
15920520.03 Recording CDs 9/24/02, 3:55 PM21