Filter
Top Products
Chapter 2: Playing CDs
14 Chapter 2
4. To program the next track, press TIME SET/PROGRAM again (or TIME SET/PROG on
the remote control).
5. Enter the second track using the number buttons on the remote or the SKIP/SEARCH
arrow buttons on the front of the recorder.
6. To select the second track, press TIME SET/PROGRAM (or TIME SET/PROG on the
remote control) (OK appears).
7. Enter any additional tracks using steps 4-6.
8. When finished, press STOP to stop programming.
•To review your programmed tracks, press and release the left SKIP/SEARCH arrow
button repeatedly to scroll through the tracks (the tracks appear, with the last track
you programmed showing first).
•To play your programmed tracks, press PLAY (the tracks play in the order you
programmed them).
•To clear your programmed tracks, press and release STOP until PROG. disappears
from the display.
Note: Programmed tracks are cleared if either disc tray is opened.
Repeat
You can repeat a single track, an entire disc, just your programmed tracks, or both discs A
and B. All repeat modes will continue to play until you turn them off.
Press and release the REPEAT button repeatedly to scroll through the modes:
REPEAT 1– repeats the current track
REPEAT – repeats the current disc or programmed tracks
REPEAT ALL – repeats all discs or programmed tracks
Random
You can play your programmed tracks and both disc A and B in random order.
1. To start random play, press the RANDOM button on the remote (RANDOM appears).
2. To stop random play, press RANDOM again (RANDOM disappears).
Note: If you open either disc tray, random play is stopped.
15920520.02 Playing CDs 9/24/02, 3:55 PM14