Filter
Top Products
Chapter 3: Recording CDs
18 Chapter 3
Recording from an External Source Using CD Sync
(Digital Synchronized)
This is the preferred method of recording from an external source. It allows you to
choose from optical or coaxial connections, depending on the output connections of the
external source, and also automatically detects when a digital signal is sent to the
recorder. (If your external audio source is compatible with the CD SYNC feature,
the track information and recording cues will be done automatically.)
If the external player is compatible, then all you have to do to start recording is press the
Play/Pause button on your external source to start recording. If the external audio source
is not compatible, automatic recording will not start. You need to record using the analog
connections. Refer to the owner’s manual for your external player for more information.
1. Put a blank disc in tray B.
2. Make sure the CD, tape, etc., is ready in the external source.
3. Press and release SOURCE IN until OPT (optical) or DIG (digital) is displayed.
4. Press CD SYNC until the desired setting is displayed, CD SNYC and CD SYNC or TRK
SYNC and CD SYNC1.
5. Press PLAY/PAUSE on side B of the unit, then start the external source audio.
If you start recording in the middle of a track, CD SYNC won’t start recording until
the beginning of the next track.
When finished recording, (BUSY appears, followed by UPDATE ).
•To check the remaining recording time, press REMAIN.
•To stop recording, press STOP.
15920520.03 Recording CDs 9/24/02, 3:55 PM18