Radio Shack CD-3319 Cassette Player User Manual


 
13
3. Select the track you want by
pressing
SKIP/SEARCH
or
. The track number you
selected appears on the display.
4. Press
PROGRAM
. The selected
track is stored, and the next pro-
gram number appears on the dis-
play.
5. Repeat Steps 3 and 4 to store up
to 16 tracks.
Notes:
You can store the same track
more than once.
When 16 tracks are pro-
grammed,
C -01
and the first
track’s number appear on the
display.
6. To complete programming and
play the programmed sequence,
press
PLAY/PAUSE
. The CD
player begins playing the first
track of the programmed
sequence. The display shows the
play indicator, the current track
number, and the current track’s
elapsed playing time.
Notes:
Programming is not completed
until you press
PLAY/PAUSE
.
To repeat, skip over, or search for
tracks, see “Special CD Player
Features.”
Checking a Programmed
Sequence
To check the programmed sequence,
while the CD is stopped, repeatedly
press
PROGRAM
. The display shows
each stored track number.
Erasing a Programmed
Sequence
Any of the following will erase a pro-
grammed sequence:
•Press
STOP/CLEAR
until
clears from the display and the
CD’s total number of tracks and
playing time appear.
•Press
STOP/CLEAR
. Then
press
PUSH OPEN
after the CD
stops turning.
•Set
FUNCTION
to another position.
Disconnect the power source.
PROGRAM
14-543.fm Page 13 Wednesday, June 30, 1999 3:52 PM