Polycom C8 Stereo System User Manual


 
Preparing For Installation
1 - 5
Tools Needed For Installation
The following tools will be required to install your Polycom SoundStructure
unit:
A Phillips head screwdriver for installing rack ears and rack-mounting the
device.
A small blade screwdriver for terminating audio cables to the terminal
blocks.
Safety Recommendations
Read and understand the following instructions before using the system:
Always disconnect the system from power before inserting plug-in cards
into the SoundStructure device.
Only connect the system to surge protected power outlets.
Only use electrical extension cords with a current rating at least equal to
that of the system.
Always disconnect the system from power before cleaning and servicing
and when not in use.
Do not spray liquids directly onto the system when cleaning. Always
apply the liquid first to a static free cloth.
Do not immerse the system in any liquid or place any liquids on it.
Do not disassemble this system. To reduce the risk of shock and to
maintain the warranty on the system, a qualified technician must perform
service or repair work.
Keep ventilation openings free of any obstructions.
If the system or any accessories are installed in an enclosed space such as
a cabinet or equipment rack, ensure that the air temperature in the
enclosure does not exceed 40° C (104° F). Forced cooling may be required
to keep the equipment within its operating temperature range.
Warning
Save these safety instructions.