Filter
Top Products
SR-H1000 CI Guide Page 10 2/28/2008
Revision 1.0
III. Control features:
The SR-H1000 has two unique ports on the rear panel that allow the tuner to control a
2
nd
tuner and allow control systems to operate the SR-H1000 and the 2
nd
tuner*.
These ports are labeled as RS-232 and SSP.
SSP port:
The SSP port is a connection for a 2
nd
tuner to be operated by the SR-H1000 in a similar
manor to how a “Sirius Ready” receiver operates an outboard Sirius tuner. The SCH1
Sirius Connect Home Tuner (pictured below) is the tuner to be used to obtain the 2
nd
tuner source.
Alternatively, the second tuner can be a Dock and Play radio docked in the SIRIUS
Universal Home Connect dock (p/n SUHC1). The dock is similar to the universal home
dock but connects to the host A/V system with SIRIUS SSP cable. This allows use of a
transportable radio for the second tuner source (provided it has the SIRIUS Universal
Docking Connector) that can also be taken out of the home and used in a vehicle or other
applications.
RS-232 Overview:
The RS-232 port allows communication with the SR-H1000. All commands that are
present on the front panel or the remote control of the SR-H1000 are available via the
RS-232 port. In addition, the display data that is shown on the LCD display (or video
output) is available over the RS-232 port.
Entering RS232 Operation mode
1) You must use a Null-Modem cable to connect to the RS-232 port.
2) Place the SR-H1000 into "Pass-through" mode by
a) Enter the Menu and select Sirius ID
b) Press BAND, DISPLAY, then press and hold 6 (you will see the diagnostic
page)
c) Press BAND
Model#: SC-H1
Sportster 5 in SUHC1 dock