Filter
Top Products
SWITCHING FROM HEADSET TO HANDSET WHEN USING
THE LIFTER
If during a call you are using your headset and want to switch to the telephone
handset, remove the handset from the Lifter, then press the Call Control Button on
either your headset or the base unit. The Lifter will lower and you will then be able to
continue the call using the handset.
SWITCHING FROM HANDSET TO HEADSET WHEN USING
THE LIFTER
If during a call you are using the telephone handset and want to switch to your
headset, press the Call Control Button on either the headset or the base unit.
The Lifter will raise and you will be able to continue the call using your headset.
Replace the telephone handset on the Lifter. When the call is finished press the Call
Control Button on either your headset or base unit. The Lifter will lower the handset
and end the call.
13
INTELLISTAND™ ENABLE/DISABLE
When the Voyager 510 Bluetooth
®
Headset System is used in conjunction with a
Plantronics Handset Lifter, you can enable the IntelliStand™ feature.
The IntelliStand™ senses when the headset has been removed or replaced in the
Voyager 510 System Base unit, automatically activating the lifter to answer or end a
call.
The IntelliStand™ feature is disabled when the switch is in position I (as shown) or
enabled when the switch is in position II.
Note: Docking the headset always ends the call regardless if IntelliStand™ is enabled
or disabled.