Filter
Top Products
9
Check Configuration and Make a Test Call
1 If your desk phone has a volume control set it to mid-range.
2 On the bottom of the switcher, ensure the configuration slide switch is set to “A”, the listening
volume dial is set to 3 and the speaking volume dial is set to 2.
3 Remove the handset from desk phone cradle.
4 While wearing your headset, press the desk phone talk button on the MDA200.
5 If you do not hear a dial tone, adjust the configuration switch (A-G) until you do.
6 Dial a test call from the desk phone. If needed, fine tune the volume with the headset volume
controls. You can also adjust the desk phone speaking and listening volumes on the bottom of
the MDA200.
7 End call by pressing the headset call control button and returning the handset to the desk
phone cradle.
For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing
loss. Always listen at moderate levels. For more information on headsets and hearing visit:
plantronics.com/healthandsafety.