Filter
Top Products
14
MDA200 LED Buttons
LED LED State Indication
Solid green Connected to PC audio (default condition)
Flashing green Incoming PC call
Flashing yellow Active PC audio on hold
Flashing green Incoming desk phone call
Solid green Desk phone audio connected
Flashing yellow Active phone audio on hold
Both icons
flashing green
for 2 seconds
MDA200 is booting up – once complete both LEDs
will be off if no headset is connected. If a headset is
connected the PC icon will remain lit solid green.
Solid red Firmware update in process – follow firmware
update instructions to clear once complete.
Solid red Over current condition – using HL10 without power
supply. Unplug MDA200, add power adapter, re-plug
MDA200 to PC.
Flashing red Headset fault - replace headset and power cycle the
MDA200.
When you press one of the two buttons, you are opening a phone line/audio channel.
Depending on the circumstances, you won’t necessarily hear a dial tone until you’ve dialed from
your phone. The buttons allow you to switch to a different phone line/channel.
MDA200 LED Indicators