Plantronics CS60 DECT Headphones User Manual


 
USAGE INSTRUCTIONS
4
UK
DIAGRAM KEY
1 Tx Slide Switch (A-D)
2 Rx Slide Switch (1-4)
3 Speak Volume Adjust UP
4 Speak Volume Adjust DOWN
5 IntelliStand
TM
Switch ON/OFF
6 Configuration Dial
7 AC Power Adapter
8 AC Power Adapter Port
9 Handset Cable Port
10 Telephone Cable Port
11 Accessory Port
12 Headset Docking Cradle
13 Charge contacts
14 Charge Indicator
15 Talk Indicator
16 Power Indicator
17 Handset Lifter (Optional)
18 Microphone
19 Speaker
20 Talk Button
21 Listen Volume Adjust UP/DOWN
22 Headset Mute Switch
23 On-line Indicator
24 Charge contacts
25 Battery Door
BASE UNIT HEADSET
IMPORTANT SAFETY INFORMATION
Please read the following instructions before use:
General:
Operating temperature +4C to +49C
Storage temperature +4C to +49C
The product is suitable for indoor use only
To reduce the risk of electric shock, explosion or fire:
Use only the AC power adapter supplied part number 61634-02 (Euro) or 61635-02 (UK)
Ensure that the voltage rating (e.g. 230V 50Hz) corresponds to the local mains supply you intend
to use
Use only the correct battery type part number 62346-01
Do not disassemble the product
Keep all products, cords and cables away from operating machinery
Avoid contact with liquids
Connect the base unit only to a host terminal port explicitly designated for use with handsets or
headsets. Connection through other ports, such as data ports or line ports, may damage the
product and could constitute a fire hazard. If in doubt, please contact your supplier or the supplier
of the host equipment
If mains power fails, the base unit will switch to handset mode
Battery Safety:
Please observe these precautions to ensure continued safety. Misuse or mistreatment may result in
fire, explosion or the release of corrosive chemicals
Battery storage temperature +4C to +49C
Battery operating temperature +4C to +49C