Filter
Top Products
User’s Manual of FGSW-2620VM / FGSW-2620PVM
80
4.5.4 RSTP System Configuration
This section provides RSTP-System Configuration from the Switch, the screen in Figure 4-5-4 appears.
The user can view spanning tree information of Root Bridge.
The user can modify RSTP state. After modification, click
Apply
.
Figure 4-5-4: RSTP System Configuration interface
The page includes the following fields:
Object Description
RSTP mode:
The user must enable the RSTP function first before configuring the related
parameters.
Protocol Version
A value used to specify the spanning tree protocol, the original spanning tree
protocol (STP, 802.1d) or the rapid spanning tree protocol (RSTP, 802.1w).
Priority (0-61440):
The switch with the lowest value has the highest priority and is selected as the
root. If the value is changed, the user must reboot the switch.
The value must be a multiple of 4096 according to the protocol standard rule.
Max Age (6-40):
The number of seconds a switch waits without receiving Spanning-tree Protocol
configuration messages before attempting a reconfiguration.
Enter a value between 6 through 40.
Hello Time (1-10):
The time that controls the switch to send out the BPDU packet to check RSTP
current status.
Enter a value between 1 through 10.