Filter
Top Products
User’s Manual of FGSW-2620VM / FGSW-2620PVM
76
A port transitions from one state to another as follows:
From initialization (switch boot) to blocking.
From blocking to listening or to disabled.
From listening to learning or to disabled.
From learning to forwarding or to disabled.
From forwarding to disabled.
From disabled to blocking.
Switch
Blocking
Listening
Learning
Forwarding
Disable
Figure 4-5-1: STP Port State Transitions
You can modify each port state by using management software. When you enable STP, every port on every switch in the
network goes through the blocking state and then transitions through the states of listening and learning at power up. If
properly configured, each port stabilizes to the forwarding or blocking state. No packets (except BPDUs) are forwarded from,
or received by, STP enabled ports until the forwarding state is enabled for that port.