User’s Manual of FGSW-2620VM / FGSW-2620PVM
15
¾ Multicast
IGMP Snooping v1 and v2
IGMP Query mode for Multicast Media application
256 multicast groups
¾ Security
Layer 2 / 3 / 4 Access Control List (ACL)
IEEE 802.1x Port-Based Authentication
MAC address Filtering and MAC address Binding
IP address security management to prevent unauthorized intruder
Port Mirroring to monitor the incoming or outgoing traffic on a particular port
¾ Management
Switch Management Interface
• Web switch management
• Telnet Command Line Interface
• SNMP v1, v2c switch management
• Console local management ( FGSW-2620PVM only)
SNMP Trap for alarm notification of events
Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)
System Log Server/Client
Built-in Trivial File Transfer Protocol (TFTP) client
Firmware upload / download via TFTP or HTTP
Configuration upload / download via TFTP or HTTP
Supports Ping function
¾ Power over Ethernet (FGSW-2620PVM Only )
Complies with IEEE 802.3af Power over Ethernet End-Span PSE
Up to 24 IEEE 802.3af devices powered
Support PoE Power up to 15.4 watts for each PoE ports
Auto detect powered device (PD)
Circuit protection prevent power interference between ports
Remote power feeding up to 100m
PoE Management
• Total PoE power budget control
• Pert port PoE function enable/disable
• PoE Port Power feeding priority
• Per PoE port power limit
• PD classification detection