Filter
Top Products
Listening to your system 05
27
En
English
Français
Deutsch
Nederlands
Italiano
Español
Using the Sound Retriever
When audio data is removed during the
compression process, sound quality often
suffers from an uneven sound image. The
Sound Retriever feature employs new DSP
technology that helps bring CD quality sound
back to compressed 2-channel audio by
restoring sound pressure and smoothing
jagged artifacts left over after compression.
1
• Press
S.RETRIEVER (SHIFT+) (SOUND
RETRIEVER) to switch the sound retriever
on or off.
Playing other sources
1 Turn on the power of the playback
component.
2 Turn on the power of the receiver.
3 Select the source you want to playback.
Use the input select buttons (INPUT
SELECTOR).
4 Start playback of the component you
selected in step 1.
Selecting the multichannel
analog inputs
If you have connected a decoder or a DVD
player with multichannel analog outputs to this
receiver (page 10), you must select the analog
multichannel inputs for surround sound.
2
• Press
DVD 5.1
(
SHIFT
+
DVD
) on the
remote control or DVD 5.1 on the front panel.
To cancel playback from the multichannel
inputs, use the INPUT SELECTOR buttons to
select a different input signal.
Note
1 The Sound Retriever is only applicable to 2-channel sources.
2 During playback from the multichannel inputs, you can’t use any of the sound features/modes and only the volume and chan-
nel levels can be set.
VSX_517.fm Page 27 Friday, December 1, 2006 2:41 PM