Filter
Top Products
Connecting up 03
11
En
English
Français
Deutsch
Nederlands
Italiano
Español
Connecting other audio
components
The number and kind of connections depends
on the kind of component you’re connecting.
1
Follow the steps below to connect a CD-R, MD,
DAT, tape recorder or other audio component.
1 If your component has a digital output,
connect this to a digital input on the receiver.
The example shows an optical connection to
the DIGITAL OPT 1 (CD) input.
2 If necessary, connect the analog audio
outputs of the component to a set of spare
audio inputs on this receiver.
You’ll need to make this connection for
components without a digital output, or if you
want to record from a digital component. Use a
stereo RCA phono cable as shown.
3 If you're connecting a recorder, connect
the analog audio outputs (REC) to the analog
audio inputs on the recorder.
The example shows an analog connection to
the CD-R/TAPE/MD analog output jack using
a stereo RCA phono cable.
About the WMA9 Pro decoder
This unit has an on-board Windows Media
®
Audio 9 Professional (WMA9 Pro) decoder, so
it is possible to playback WMA9 Pro-encoded
audio using a coaxial or optical digital
connection when connected to a WMA9 Pro-
compatible player. However, the connected
DVD player, set-top box, etc. must be able to
output WMA9 Pro format audio signals
through a coaxial or optical digital output.
Note
1 Note that you must connect digital components to analog audio jacks if you want to record to/from digital components (like
an MD) to/from analog components.
COAX
OPT
(
CD
)
ASSIGNABLE
DIGITAL IN
1
(
DVR/VCR
)
COAX
(
DVD/LD
)
1
2
AM
LOOP
FM UNBAL
75
Ω
IN
IN
IN
MONITOR
OUT
OUT
SUB
WOOFER
IN
IN
IN
IN
OUT
OUT
IN
CD
DVR /
VCR
TV /
SAT
DVD
/LD
PLAY
CD-R
/TAPE
/MD
FRONT
PREOUT
REC
ANTENNA
D V D
5.1CH
INPUT
R
L
VIDEO
AUDIO
ASSIGNABLE
DIGITAL IN
CD-R, MD, DAT, Tape recorder, etc.
DIGITAL OUT
OPTICAL COAXIAL
R L
AUDIO IN
R L
IN
REC
AUDIO OUT
PLAY
OUT
1
3 2
This receiver
VSX_517.fm Page 11 Friday, December 1, 2006 2:41 PM