Filter
Top Products
Listening to your system 05
23
En
English
Français
Deutsch
Nederlands
Italiano
Español
Using the Advanced surround effects
The Advanced surround feature creates a
variety of surround effects. Try different modes
with various soundtracks to see which you like.
1
• Press ‘
ADV.SURR
’ repeatedly to select a
listening mode.
• ACTION – Designed for action movies with
dynamic soundtracks.
• DRAMA – Designed for movies with lots of
dialog.
• MONOFILM – Creates surround sound
from mono soundtracks.
• ENT. SHOW – Suitable for musical sources.
• EXPANDED – Creates an extra wide stereo
field.
2
• TV SURR. – Provides surround sound for
both mono and stereo TV sources.
• ADV. GAME – Suitable for video games.
• SPORTS – Suitable for sports programs.
• ROCK/POP – Creates a live concert sound
for rock and/or pop music.
• UNPLUGED – Suitable for acoustic music
sources.
• X-STEREO – Gives multichannel sound to a
stereo source, using all of your speakers.
• PHONESUR. – Creates the effect of overall
surround with headphones.
Setting the effect options
When using surround effects, there are a
number of settings you can adjust.
1Press
EFFECT/CH SEL
repeatedly to select
the setting you want to adjust.
Depending on the current status / mode of the
receiver, certain options may not appear.
Check the table below for notes on this.
2
Use the LEVEL +/– buttons
to set it as
necessary.
See the table below for the options available
for each setting. The defaults, if not stated, are
listed in bold.
3
Press EFFECT/CH SEL again to adjust
other settings
.
* Only available with 2ch sources in Dolby Pro Logic II
Music mode.
Note
1 • If you press ADV.SURR with the headphones connected, PHONES SURROUND will automatically be selected.
• When an Advanced Surround listening mode is selected, the effect level can be adjusted using the EFFECT parameter in
Setting the effect options below.
2 Use with Dolby Pro Logic for a stereo surround effect (stereo field is wider than Standard modes with Dolby Digital sources).
TOP MENU
CD-R
AMFMCD
MENU
AUTO SURR STANDARD
S.RETRIEVER
ADV.SURR
STEREO/
F.S.SURR
Setting What it does
Options
Center
Width
*
(Applicable
only when
using a cen-
ter speaker)
Spreads the center channel
between the front right and left
speakers, making it sound
wider (higher settings) or
narrower (lower settings).
0 to 7
Default:
3
Dimension
*
Adjusts the surround sound
balance from front to back,
making the sound more distant
(minus settings), or more
forward (positive settings).
–3 to +3
Default:
0
Panorama
*
Extends the front stereo image
to include surround speakers
for a ‘wraparound’ effect.
OFF
ON
Effect Sets the effect level for the
currently selected Advanced
Surround mode (each mode
can be set separately).
10 to 90
VSX_517.fm Page 23 Friday, December 1, 2006 2:41 PM